CREMAX Dashboard Phone Holder Magnetic Mount Stand
1. Wipe the target spot with an alcohol prep pad and wait until it is completely dry
2. Peel off the 3M protector (If the temperature is below 15°C, please warm the 3M pad with hot wind for a while)
3. Press the mount to the flat dashboard with 3kg force for about 30 seconds
4. Place the metal plate between the phone and the case or stick it onto your phone case
5. Place the phone to the mount (Do not use the mount until 24 hours pass)
1.Matel/magnetic plates will hinder wireless charging capabilities.
2.Please note that you will not be able to reuse an adhesive mount once you remove it.
3.The 3M pad will lose its viscosity if you touch it with your hand.
4. To remove the metal plate, please warm it with a hair dryer, then use some dental floss to lift and detach it.
5. We do not recommend to use this phone mount with older vehicles. The dashboard of older vehicles may have become more brittle due to sun damage. We are not responsible for the dashboard repair if any damage occurs.
What's in the Box:
1 x Magnetic Car Phone Mount
2 x Metal Plates
2 x 3M Adhesive Pads
2 x Alcohol Pads
1 x User Manual