1. The heating unit is only under the sole, and it will get warmer gradually rather than in a sudden.
2. Two connectors must be pluged into the adapter at the same time, otherwise the massager will fail to work well.
3. Please don't wrap too tight when you use it for the first
time. Leave at least 4 fingers' space and start with weak intensity in
order to help you accommodate to the massage mode.
4. The massager uses air compression method. The airbags in
each wrap will squeeze in a certain order regarding to the selected
5. If you are suffering health problems such as skin
infections, fragile skeleton, heart disease etc., please kindly consult
your doctor before use.
1. Put your legs into the correct wrap: right leg into R , left leg into L .
2. Get on the velcro. Dont wrap too tight, it is recommend to leave a gap that you can put 4 fingers in it.
3. Plug in the connector into the corresponding hole of the
handheld controller. The connector must be pluged in completely.
4. Connect the controller to the power socket via the ac adapter.
5. Press the power button for 3 seconds, the leg massager will start to work.
6. Press the power/program/heat button to switch
intensity/mode/heat temperature when massaging. Finally enjoy a